Works with Alexa
Connect speakers to your home Wi-Fi network, and control them with voice commands via third-party voice interaction.
Music Synchronized for Multiple Rooms
Group two or more speakers to form a multi-room music system. Enjoy synchronized music playback while wandering in the room.
Hi-Res Audio Technology
Listen to your favorite tunes in the highest quality possible with this speaker that offers up Hi-Res audio technology and a sample rate as high as 24bit/192kHz.
Couldn't load pickup availability
Free Shipping Over $49 to 48 States
Simply connect this speaker to your home Wi-Fi network, and register your S1000W with your Amazon account through the Edifier Home App. By using a third-party voice interaction, you can use your voice to play and pause music, change tracks, adjust volume, and more. Stream music directly from your iPhone, iPad, or Mac and enjoy Hi-Res audio from your favorite music app.
It features both Wi-Fi and Bluetooth connections for your smooth listening needs as well as a stable transmission with low power consumption. The high-quality audio experience is what you can expect from this speaker.
These speakers feature 120 watts of power, so you can crank up the volume and enjoy your music, movies, and games to the fullest without distortion.
The speaker supports all major connectivity options, including WiFi, Bluetooth, OPT, COX, and AUX. You can connect this speaker to any type of input.
The angled design is made specifically for creating a larger sound with a low frequency. This design is incredibly robust, which makes it reduces the resonance of the sound. Attaching the grill of the S1000W reduces the attenuation so you can get the full strength of the sound signal.
The S1000W has a titanium dome tweeter for creating a smooth response rate. The titanium also helps give an excellent dispersion and better sensitivity than plastic tweeters.
Using Texas Instruments DSP professional audio processing chip for accurate control of frequency division point, the speaker can better reproduce the sound detail.
Crank up the volume with this stylish yet simplistic form factor with the 5.5-inch aluminum bass drivers. These drivers create a surge of bass for anyone looking to get the most from their sound.
It comes with remote control for your convenience to change the audio from anywhere in the room. Bass, Treble, and Volume control knobs are also available on the side panel of the speaker system should you require them.
SOUND
FREQUENCY RESPONSE
NOISE LEVEL
SIGNAL-TO-NOISE RATIO
Optical/Coaxial
DRIVER UNIT
DESIGN
DIMENSION
NET WEIGHT
POWER
TOTAL POWER OUTPUT
CONNECTIVITY
INPUT TYPE
BLUETOOTH VERSION
INPUT SENSITIVITY
Self-powered speakers require a Pre-amp to boost the phono signal to a line-level. Many modern turntables come with a built-in switchable pre-amp. Usually the switch to turn on the pre-amp is either on the back of the turntable, or underneath the platter. The switch is most commonly labeled Phono/Line, it will need to be in the Line position. To find out if your turntable has a built-in pre-amp please refer to the owner’s manual, or contact the manufacturer.
Certainly, you can use a self-powered subwoofer with your powered speakers. To do this, you will need an RCA Y-splitter. Here's how to set it up:
Please note that if your powered speakers do not have a dedicated sub-out or low-pass filter, they will continue to play bass frequencies when connected to the subwoofer. You may need to adjust the crossover settings on your subwoofer to achieve the desired balance between the speakers and the subwoofer for optimal sound quality.
Using dual Bluetooth audio with your speakers is possible, but it depends on whether your audio source supports this feature. To check if your audio source can output audio to multiple Bluetooth devices simultaneously, refer to the owner's manual of the device or contact the manufacturer for information on its Bluetooth capabilities.
If your device does not support dual Bluetooth audio, you can consider purchasing an external Bluetooth splitter transmitter. These devices can be found from various online retailers and allow you to connect multiple Bluetooth devices to a single audio source, like your speakers, by splitting the Bluetooth signal.
This issue is usually caused by a tracking issue on the turntable. To test if it is the turntable at fault or the speakers, reverse the RCA jacks on the control speaker, red to white and white to red. If the issue now occurs on the other speaker, it is the turntable at fault. Please contact your turntable manufacturer for instructions on how to properly set the tracking. If the issue remains on the same channel it is problem. Please contact our customer service team for troubleshooting and assistance.
Authorized Retailer
Hassle-Free Return
Local Fast Shipping
30 Days Money-Back Guarantee
We are an authorized retailer of Edifier products, ensuring that you receive genuine and high-quality items directly from the manufacturer.
We offer a hassle-free return and exchange policy, allowing you to shop with confidence. If you need to cancel an order or make changes, we make the process easy and convenient.
We prioritize fast shipping, ensuring that your Edifier products reach you promptly and securely. As a local seller, we strive to provide a seamless shopping experience.
We stand behind our products. If you are not satisfied with your purchase, we offer a 30-day money-back guarantee, giving you peace of mind and assurance.
